SO SNOW CAP – PVC Capping Seal

Type:                     Capping Seal
Environment:     Interior
Material:              Flexible PVC
Height:                 40mm
Gauge:                  2mm
Used with:           Resilient Floorcovering
Length:                 2.0m

SO SNOW CAP – Tech Data Sheet      

SKU: SO SNOW CAP Categories: ,

 

SO SNOW CAP is a white flexible pvc capping seal used to finish the top of a resilient floorcovering where it has been coved up the wall.

Capping seals are usually used in conjunction with a cove former.

 

 

Technical Data

Reference:     SO SNOW CAP
Material:        Flexible PVC
Height:           40mm
Gauge:             2mm
Colour:           Snowdrift (LRV: 80.86)
Fixing:            Adhesive fix – as per manufacturers instructions    

Installation

  SO SNOW CAP should be allowed to acclimatise for 24 hours prior to installation at an ambient temperature of 18o Celsius.

  1. It should be ensured that all surfaces to which the profile is to be fixed are sound, dry, flat and free from any contaminants. Wall surfaces should be free from any previous coverings, linings or adhesive residues used to fix them.  Paint films and any mould must be removed and the affected surface treated correctly.
  2. Mark the position of the top of the capping seal on the wall and strike a straight line between the two points using a chalk line.
  3. Apply a suitable contact adhesive and follow the manufacturers instructions for application.
  4. Bring both surfaces together and apply even pressure along the capping seal ensuring any air bubbles are removed and full contact is made with the wall.
  5. All internal corners should be mitre cut. External corners may be mitre cut or wrapped around the corner providing adequate provision is taken to allow the floorcovering to be installed.  It can then be fitted into the top channel of the capping seal.

 

Related products